For proper and safe operation of your DLI LED fixtures, regular maintenance must be performed on your LED fixtures. Severe fixture contamination can have consequences for the warranty of your LED fixtures.
With a dirty lens, the LED cannot dissipate its light (=heat) and, regardless of the brand or type of LED fixture, damage can occur to the LED board and lens.
Also, regular maintenance prevents unnecessary light loss, increases reliability and extends the lifetime of your LED fixtures. You can easily determine the degree of soiling by passing a cloth designed specifically for maintaining your fixture over the lens and fixture. The necessary frequency of maintenance depends on the degree of soiling of the fixture due to daily operations in your greenhouse.
It is also important to blow the cooling fins on top of the fixture clean with a compressor, or vacuum clean with a vacuum cleaner.
How to use cleaning wipes
1. Turn off your fixture and disconnect the fixture from power. and allow the fixture to cool down
2, Wrap the wipe around the LED bar by hand.
3. With one swipe, move the wipe from one side to the other. Turn the wipe over or use a new wipe if necessary.
4.After this, go to the next LED bar and repeat the previous steps.
5. Your LED fixtures are ready to use again.
Protect your LED and HPS fixtures with LED covers. Our covers offer optimal protection against moisture and cleaning agents during crop changes or other (cleaning) activities.
How does it work?
The LED covers are easy to install on your fixtures. Follow the step-by-step plan below to ensure optimal protection..
1. Preparation
Ensure that you can work safely at height. Switch off the fixtures and allow them to cool completely before you start.
2. Placing the cover
Remove one cover from the box. Apply the silver adhesive strip horizontally to the fixture. This strip holds the cover in place but is easy to remove afterwards. Wrap the cover completely around the fixture. Seal the cover securely with the white adhesive strip for a tight seal
3. Repeat the steps
Repeat the above steps for each fixture you want to protect.
Voor vragen of informatie over deze vacature, mail ellen@dli.nl of bel: 06 20 93 72 75
“At DLI we go for the best results and create room for innovation.”